UK Audi Forum banner

VAGCOM Engine 16395 Camshaft A (Intake) error

4786 Views 4 Replies 3 Participants Last post by  CkB
This came out of the car this weekend when one of our fellow uk-mkivs brothers was good enough to run a scan over the car.

Address 01: Engine Labels: None
Part No: 8N0 906 018 CA
Component: 1.8L R4/5VT 0010
Coding: 10710
Shop #: WSC 01236
WUAZZZ8N861901107 AUZ5Z0C1169437
1 Fault Found:
16395 - Bank 1: Camshaft A (Intake): Retard Setpoint not Reached (Over-Adv
P0011 - 35-10 - - - Intermittent
Readiness: 0000 0000

One for the dealers I think, I'll come back and update when I can [y]

1 - 5 of 5 Posts
Hi haf - thanks for taking the time to post up the useful links - I'd seen two of them (one being the wiki), but I'd not seen the first one!

It's all under Audi Warranty so it'll get thrown back at them to look at next week with any luck!

I never did come back and close off this thread! I gave it back to Audi who acknowledged the fault and checked back through their gear.

The official answer was "as a one off, don't worry about it, but if it comes back then give it back to us and we'll have to start taking it to bits".

Not helpful (and I'm about as engine aware as a dead newt) but it's not come back yet!

1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.