UK Audi Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
4,874 Posts
All depends on the power wanted. Yours is an early 1.8t so it will have the ko3 and not the ko3s. The ko3 is good for 190- 200bhp. But you will prob need a miltek exhaust and induction kit. Then a remap.
 

·
Registered
Joined
·
4,874 Posts
The ko3 is the type of turbo that came on your car. then in later years they were updated to ko3, ko3s and Ko4
 

·
Registered
Joined
·
31 Posts
Discussion Starter · #6 ·
so it's a case of sourcing a Ko3s from a scrapper or ebay and bolting it on or is there more to it?
 

·
Registered
Joined
·
4,874 Posts
You will need a 4bar fuel pressure regulator and a new TIP (turbo intake pipe) and you will have to get the re-mapped again. But thats all!
 
1 - 7 of 7 Posts
Top